Application

– The surface to be covered must be thoroughly cleaned, dry, dust-free and degreased. Any silicone, butyl, or other unidentified materials should be completely removed.
– Apply a thin and even layer of U-PRIMER glue primer to the glass/glass bonding and allow to dry for a minimum of 15 minutes.
– Apply the adhesive to the glass using the nozzle.
– Immediately replace and press the glass into place.
– Remove any excess compound with nitrocellulose thinner or acrylic thinner. After curing, mechanical cleaning is required.

Note: For safety purposes, always follow the data on the Material Safety Data Sheet for the product.