Description
Quick-drying, lead-free, acrylic-based spray lacquer that produces a high-gloss effect. Gives smooth surfaces a chrome-like effect, resistant to weathering. Designed for small body parts, decorations, etc. Do not apply any other paint over chrome.

Substrates
The product is designed to be applied to processed and untreated surfaces of wood, metal, glass, aluminum, stone and made of various plastics.

The surface to be coated should be clean, dry and degreased. Splashes of old varnish and rust should be removed beforehand and the surface sanded.

In the case of plastic, it is advisable, before starting varnishing work, to heat the element at 50°C, which will facilitate the removal of silicone compounds from its surface.

Good surface preparation is essential to achieve the best repair results.

Substrate and surface preparation
The product is designed to be applied to processed and untreated wooden, metal, glass, aluminum, stone and surfaces made of various plastics.
The surface to be coated should be clean, dry and degreased.
Splashes of old varnish and rust should be removed beforehand and the surface sanded.
In the case of plastic, it is advisable, before starting varnishing work, to heat the element at 50°C, which will facilitate the removal of silicone compounds from its surface.

Informacja
Application
The best temperature for aerosol application is 15 ÷ 25°C.
For best results, apply a coat of black primer before using the SILVER CHROM aerosol.
Do not combine with clear lacquers and synthetic lacquers.
– Before use, shake the container about 2 – 3 minutes and try the spray on a cardboard box.
– When varnishing, hold the aerosol at a distance of 25 ÷ 30 cm from the painted surface.
– Apply the varnish in several thin layers at intervals of no more than 5 ÷ 10 minutes. Shake the aerosol again before applying each layer.
– It is recommended to set the aerosol with the valve down and press the button releasing the contents for about 5 seconds after finishing the application – this will improve the re-use of the product and preserve its existing properties, as well as protect the nozzle from possible clogging.
Note: for safety purposes, always follow the data on the Material Safety Data Sheet for the product.

Drying times at 20°C*:
– dust dry: after about 5 – 15 minutes
– fully dry: after about 24 hours

*Drying time depends on temperature, humidity and coating thickness.